Sinohard Hardware Co Ltd
How to choose the right drawer slides?
There are various of drawer slides in market now. How to choose a quality drawer slide becomes difficult. A quality drawer slide is durable. It can save you time and money.
1, Product Surface:
No damages or scratchs on surface. The drawer slide is made from steel. If surface is scratched, there is no protected layer to protect steel from rust. The drawer slide will be rusty quickly.
2, Loading Capacity:
The slide loading capacity directly affects the quality of the drawer. Pull the drawer completely, with the outer hand presses the drawer of the front, to observe the drawer front inclination from the side surface. The inclination of the smaller, the stronger the ability of bearing of the drawer. Thus can view the bearing capacity of the drawer.
3,The material of drawer slide:
The material decide the slides if they are strong. Surface of good quality of drawer slides will be very smooth. Of course, not every slides with smooth surface are good quality slides.
Keywords: ball bearing drawer slide, undermount drawer slide, soft closing drawer slide, self closing drawer slide, push open drawer slide, handles and knobs, soft closing hinges, furniture hardware,
How to choose The right drawer slides?
The ultimate guide to drawer slides in this part will cover all of the elements you need to consider when deciding which drawer slide is right for your project.
The ideal type of mount:
1, Bottom mount drawer slides
Bottom left and bottom right.
Hand sides of the drawer box.
Roller-guided bottom-mount drawer slides are mostly commonly used for frameless cabinets. But they have been adapted for use in face frame cabinets too.
2, Center-mount slides
Directly under the center of a drawer.
Center-mount slides are single slides that are easier to install, however, they may restrict the height of the drawer and hold less weight than side-mount slides.
3, Undermount slides
Slide attach to the sides of cabinet, locking devices attach to the underside of the drawer body inside of the cabinet.
Undermount slides are ideal when you want to hightlight the quality of your cabinetry itself because the slides are not visible.
4, Side-mount slides
Horizontally to the drawer and the cabinet body.
Side-mount slides are discreetly located out of sight, which is great for featuring high quality cabinetry.They are apt for limited horizontal space and require less than 1/4" area.
5, Groove mount drawer slides
In a groove milled into the side of the drawer box.
Light loading groove-mount drawer slides are not commonly used in the U.S and are typically found on imported furniture from Europe. They are generally only used in a partial extensioin variation.
It is important for users to consider their ideal slide length and extension when choosing drawer slides. Because drawer slides can last for years it is worth making an investment in the exact configuration you would be most likely to enjoy over a long period.
In general most people buy slides that range in size from 10" to 28".
Additional length from 30" to 60" is also available.
Distance(-1): Side-mount and center-mount
For side-mount and center-mount slides, typically measure the distrance from the front edge of the cabinet to the inside face of the cabinet back and then subtract 1" .
Same Length: Undermount slides
Measure the drawer length. Slides must be the same length as drawer to work properly.
Slides Extension Types
Loading Capacity( Load Rating)
In general, all drawer slide are rated based on an 18 inch length. Longer slides will have less weight capacity, slides shorter than 18 inch will have a higher capacity.
The key to getting your money's worth is to ensure that you are getting a product that is rated to hold as much weight as you will require. Weight rating is an important consideratioin because you want to have a drawer slide hat lasts for a lifetime of use.
The Weight Rating is key consideration in places like the kitchen where heavy cooking pots& pans could easily break down lesser slides.
The Ideal Type of Motion
The Three Types of Disconnects
Disconnects are the mechanisms that allow you to remove a drawer from its housing. There are three common types of disconnects: lever, rail and friction. Each one is a little different from each brand.
Features a latch that enables you to raise the drawer up off the slide to pull it away from the desk or cabinet in which it's housed.
Fetures an internal lever that, when drepressed, allows the drawer to slide out freely.
Does not require that manipulation of a latch or lever but simply allow you to open your slide against the force of the ball bearing holding it.